Service and Repair of Drum Brake Backing Plate for Venture AWD V6-34L VIN E
Backing Plate: Service and Repair
Brake Backing Plate Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
Notice: Do not pry against the splash shield or backing plate in attempt to free the drum. This will bend the splash shield or backing plate. A bent
backing plate may cause brake chatter and/or pulsation.
2. Remove the tire and wheel.
3. Remove the brake drum.
4. Remove the brake shoes.
5. Remove the park brake actuator from the park brake cable.
6. Remove the park brake cable ONLY from the backing plate.
7. Remove the wheel cylinder (3).
8. Remove the wheel bearing/hub.
9. Remove the backing plate.
Installation Procedure