Venture AWD V6-3.4L VIN E (2004)
11. Remove the bolt which secures the evaporator inlet tube to the condenser block.
12. Disconnect the evaporator inlet tube from the condenser block.
13. Cap or tape off the evaporator inlet tube.
14. Remove the radiator and condenser assembly.
15. Release tension from the hose clamp at the radiator using the J 38185.
16. Remove the lower radiator hose.
17. Remove the condenser tube clip bolt.
18. Remove the mounting bolts that secure the condenser to the radiator.
19. Remove the condenser from the radiator.
Installation Procedure
1. Install the condenser to the radiator.
