Venture AWD V6-3.4L VIN E (2004)
Fan Blade: Service and Repair
Fan Replacement
Removal Procedure
Caution: Refer to Electric Coolant Fan Caution in Service Precautions.
Caution: Refer to Damaged Fan Blade Caution in Service Precautions.
Important: If abnormal noise or vibration is felt from the engine compartment, inspect and clean any foreign material from the cooling fan blades.
1. Turn the ignition on.
2. Remove the cooling fans with the cooling fan shroud.
Important: Turn the cooling fan nut clockwise to loosen.
3. Remove the cooling fan nut.
4. Remove the cooling fan.
Installation Procedure
1. Install the cooling fan.
Notice: Refer to Fastener Notice in Service Precautions.
Important: Turn the cooling fan nut counterclockwise to tighten.
2. Install the cooling fan nut.
^
Tighten the nut to 6 Nm (53 inch lbs.).
3. Install the cooling fans with the cooling fan shroud.
