Venture AWD V6-3.4L VIN E (2004)
10. Clean the water pump mating surfaces.
Installation Procedure
1. Install the water pump gasket.
2. Install the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water pump bolts.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
4. Install the water pump pulley. Loosely install the mounting bolts.
5. Install the drive belt.
6. Install the water pump pulley bolts.
^
Tighten the bolts to 25 Nm (18 inch lbs.).
7. Install the drive belt guard.
