Venture AWD V6-3.4L VIN E (2004)
Timing Cover: Service and Repair
Engine Front Cover Replacement
Removal Procedure
1. Drain the engine cooling system.
2. Drain the engine oil.
3. Remove the crankshaft balancer.
4. Remove the drive belt tensioner.
5. Remove the power steering pump with lines. Move the power steering pump aside.
6. Disconnect the thermostat bypass pipe from the engine front cover.
7. Disconnect the radiator outlet hose from the front cover.
8. Remove the coolant pump pulley.
9. Remove the upper crankshaft position sensor wiring harness bracket from the engine front cover.
10. Remove the lower crankshaft position sensor wiring harness bracket from the engine front cover.
