Venture AWD V6-3.4L VIN E (2004)
1. Install the right hand temperature actuator.
2. Install the right hand temperature actuator mounting screws.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to.....1.6 N.m (14 lb in).
3. Connect the right hand temperature actuator electrical connector.
4. Install the right hand temperature lever (1) to the right hand temperature door.
IMPORTANT:Align the pin on the right hand air temperature actuator with the slot in the right hand temperature door lever.
5. Connect the right hand temperature door lever spring (2) to the right hand temperature door lever (1) and HVAC module case.
6. Install the instrument panel compartment.