Venture AWD V6-3.4L VIN E (2004)
Cabin Ventilation Duct: Service and Repair
PRESSURE RELIEF VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear bumper fascia.
2. Remove the rear accessory panel.
3. Use a small, flat-bladed tool in order to push on the retainers from the inside of the quarter panel.
4. Remove the pressure relief valve from the body.
INSTALLATION PROCEDURE
1. Install the pressure relief valve to the body.
2. Push in the pressure relief valve in order to secure the retainers into the body.
3. Install the rear accessory panel.
4. Install the rear bumper fascia.
