Venture AWD V6-3.4L VIN E (2004)
INSTALLATION PROCEDURE
1. Install new seals onto the auxiliary heater core.
2. Install the heater core mounting bracket to the auxiliary heater core.
3. Install a new pipe seal onto the auxiliary heater core.
4. Install the auxiliary heater core into the HVAC module assembly.
5. Install the auxiliary heater core mounting screws.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to.....1.6 N.m (14 lb in).
6. Install the auxiliary heater pipe clamp screw.