Venture AWD V6-3.4L VIN E (2004)
12. Remove the air distribution duct mounting bolts.
13. Remove the air distribution duct mounting retainer.
14. Disconnect the air distribution duct from the HVAC module.
15. Disconnect the auxiliary blower motor electrical connector.
16. Disconnect the auxiliary blower motor resistor electrical connector.
17. Disconnect the auxiliary temperature actuator electrical connector.
18. Remove the HVAC module assembly mounting bolts and nut.
19. Disconnect the left PSD module from the mounting bracket and reposition aside.
20. Remove the HVAC module assembly from the vehicle.
21. Remove and discard the HVAC module assembly to body seals.
INSTALLATION PROCEDURE
1. Install new HVAC module assembly to body seals.
