Venture AWD V6-3.4L VIN E (2004)
Negative: Service and Repair
Battery Negative Cable Disconnect/Connect Procedure
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Turn off all the lamps and accessories.
2. Turn the ignition OFF.
3. Remove the battery ground (negative) cable and bolt from the battery.
INSTALLATION PROCEDURE
1. Install the battery ground (negative) cable and bolt to the battery.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
Tighten
Tighten the battery terminal bolt to 16 N.m (12 lb ft).