Venture AWD V6-3.4L VIN E (2004)
Starter Motor: Service and Repair
REMOVAL PROCEDURE
IMPORTANT: This vehicle uses the PG260 F1 starter motor. The starter motor is serviced only as a complete unit.
1. Disconnect the battery ground (negative) cable from the battery.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove radiator air baffle assembly.
4. Remove the starter motor BAT terminal nut and electrical leads.
5. Remove the starter motor S terminal nut and electrical lead.
6. Remove the torque converter cover.
7. Remove the starter motor bolts.
8. Remove the starter motor.
INSTALLATION PROCEDURE
