Venture AWD V6-3.4L VIN E (2004)
11. Remove the CPA from the side impact module - LF yellow 2-way connector (4) located under the driver seat.
12. Disconnect the side impact module - LF yellow 2-way connector (4).
13. Remove the CPA from the seat belt pretensioner - LF yellow 2-way connector (3) located under the driver seat.
14. Disconnect the seat belt pretensioner - LF yellow 2-way connector (3).
15. Remove the CPA from the side impact module - RF yellow 2-way connector (4) located under the front passenger seat.
16. Disconnect the side impact module - RF yellow 2-way connector (4).
17. Remove the CPA from the seat belt pretensioner - RF yellow 2-way connector (3) located under the front passenger seat.
18. Disconnect the seat belt pretensioner - RF yellow 2-way connector (3).
ENABLING PROCEDURE
1. Remove the key from the ignition.
2. Connect the I/P module yellow 4-way connector (1) located behind the right side insulator panel.
3. Install the CPA to the I/P module yellow 4-way connector (1).
4. Install the instrument panel (I/P) compartment.
