Venture AWD V6-3.4L VIN E (2004)
Notice: Refer to Fastener Notice in Service and Precautions.
2. Install the control valve body bolts (375, 379 and 381) that mount the fluid pressure manual valve position switch to the control valve body (300).
^
Tighten the control valve body bolt (375) to 12 Nm (106 inch lbs.).
^
Tighten the control valve body bolt (379) to 16 Nm (12 ft. lbs.).
^
Tighten the control valve body bolt (381) to 8 Nm (70 inch lbs.).
3. Connect the transaxle wiring harness.
4. Install the case side cover. Refer to Case Side Cover Replacement.
