Venture AWD V6-3.4L VIN E (2004)
Transmission Temperature Sensor/Switch: Service and Repair
Thermo Element Replacement
Thermo Element Replacement
^
Tools Required
-
J 34094-A Thermo Element Height Gage
Removal Procedure
1. Remove the oil pan. Refer to Oil Pan Replacement.
2. Remove the thermo element pins and washers (120 and 123).
3. Remove the thermo element (121) and the thermo element plate (122).
Installation Procedure
1. Use the J 34094-A to set the middle thermo pin (123).
2. Install the new thermo element plate (122).
3. Install the pin and washer (120).
4. Use the J 34094-A to set the height of the pin and washer (120) furthest from the accumulator.
5. Use the J 34094-A to set the height of the second pin and washer (120).