Venture AWD V6-3.4L VIN E (2004)
16. Install the vent hose (2) and the clamp (1) to the transfer case.
17. Install the vehicle speed sensor electrical connector.
18. Install the propeller shaft.
19. Install the transfer case drain plug and fill the transfer case with the specified synthetic gear oil.
20. Install the drain plug (1) and gasket to the case.
^
Tighten the drain plug to 32 Nm (24 ft. lbs.).
21. Install the transfer case lower brace.
22. Lower the vehicle.
23. Inspect and adjust the transmission fluid level.