Venture AWD V6-34L VIN E (2004) | Wiper Motor Cover Replacement - Front
Wiper Motor: Service and Repair
Wiper Motor Cover Replacement - Front
WIPER MOTOR COVER REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the wiper motor.
2. Remove the wiper motor cover screws.
3. Remove the wiper motor cover from the wiper motor.
INSTALLATION PROCEDURE
1. Position the wiper motor cover to the wiper motor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the wiper motor cover screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Install the wiper motor.
4. Inspect the wipers for proper operation.
Wiper Motor Cover Replacement - Rear
WIPER MOTOR COVER REPLACEMENT - REAR