300 V6-3.5L (2008)
Speaker: Service and Repair
Speaker - Removal
REMOVAL
FRONT DOOR SPEAKER
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
1. Disconnect and isolate the battery negative cable.
2. Remove front door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel/Removal.
3. Remove mounting fasteners.
4. Disconnect electrical harness connector and remove speaker.
INSTRUMENT PANEL SIDE SPEAKER
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
1. Disconnect and isolate the battery negative cable.
2. Remove speaker cover from instrument panel.
3. Remove mounting fasteners.
4. Disconnect electrical harness connector and remove speaker.