chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Towing Information|Towing|Page 10207 > < Towing Information|Towing|Page 10205
Page 4
background image

-

GVWR

-

GTW

-

GAWR

-

Tongue weight rating for the trailer hitch utilized. (This requirement may limit the ability to always achieve the 10% to 15% range of tongue
weight as a percentage of total trailer weight.)

Towing Requirements - Tires

-

Do not attempt to tow a trailer while using a compact spare tire.

-

Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.

-

Also, check the trailer tires for proper tire inflation pressures before trailer usage.

-

Check for signs of tire wear or visible tire damage before towing a trailer. Refer to the See: Maintenance/Wheels and Tires/Tires/Description and
Operation section on Tread Wear Indicators for the proper inspection procedure.

-

When replacing tires refer to See: Maintenance/Wheels and Tires/Tires/Description and Operation Replacement Tires for proper tire replacement
procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle's GVWR and GAWR limits.

Towing Requirements - Trailer Brakes

-

Do not  interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and
possible personal injury.

-

An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer
equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required.

-

Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).

CAUTION: 
If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity. Failure to do
this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances.

WARNING: 
Do not connect trailer brakes to your vehicle's hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have
brakes when you need them and could have an accident.

Towing any trailer will increase your stopping distance. When towing, you should allow for additional space between your vehicle and the
vehicle in front of you. Failure to do so could result in an accident.

Towing Requirements - Trailer Lights & Wiring

Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety.

The Trailer Tow Package may include a 4- and 7-pin wiring harness. Use a factory approved trailer harness and connector.

NOTE: Do not cut or splice wiring into the vehicles wiring harness.

The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.

Towing Information|Towing|Page 10207 > < Towing Information|Towing|Page 10205