300 V6-3.5L (2008)
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
Installation
INSTALLATION
1. Check to be certain that the five spring nuts (1 and 3) are properly installed and in good condition on the inside of the door (2).
2. Check to be certain that the three plug grommets (1 and 2) are properly installed and in good condition on the inside of the door.
3. Installing a new door trim panel (1) with the original door module (6) or new door module (6) the module can be attached by using screws or heat