300 V6-3.5L (2008)
12. Install two pressure line retainer bolts (1) on cradle (2).
13. Install front belly pan.See: Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation
14. Install nut (3) and bolt (1) attaching shock clevis bracket (2) to lower control arm (7). Tighten to 174 Nm (128 ft. lbs.).
15. On each side of vehicle, install nut (3) fastening stabilizer link (4) to stabilizer bar (5). Slide link ball joint stem on to bar. Tighten link nut to 81
Nm (60 ft. lbs.).
