300 V6-3.5L (2008)
2. Loosen the front of the scuff plate trim from the rear door sill for access to the rearward lower B-pillar trim screw. See: Scuff Plate/Service and
Repair/Door Sill Scuff Plate/Door Sill Scuff Plate - Removal.
3. Move aside the seat belt webbing to access and remove the two screws (2) that secure the upper end of the lower B-pillar trim (3) to the inside of
the B-pillar (1).
4. Remove the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills.
5. Disengage the seat belt webbing from the slot in the upper end of the lower B-pillar trim through the slit in the trim and remove the trim from the
inside of the B-pillar.
Installation
LOWER
1. Engage the seat belt webbing through the slit and into the slot in the upper end of the lower B-pillar trim (3) and position the trim to the inside of
the B-pillar (1). Be certain the webbing is not twisted.
2. Press fit the lower end of the lower B-pillar trim to the front and rear door opening sills.
3. Install and tighten the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills. Tighten the screws to 2 Nm (22
in. lbs.).
4. Move aside the seat belt webbing to install and tighten the two screws (2) that secure the upper end of the lower B-pillar trim to the inside of the
B-pillar. Tighten the screws to 2 Nm (22 in. lbs.).
5. Reinstall the scuff plate trim onto the rear door sill. See: Scuff Plate/Service and Repair/Door Sill Scuff Plate/Door Sill Scuff Plate - Installation.
6. Reinstall the lower cowl trim onto the front door opening sill. See: Cowl Trim/Cowl Trim - Installation.
Removal
UPPER
1. Remove the lower trim from the inside of the B-pillar (2). See: Pillar Trim/B-Pillar Trim.
2. Unsnap and remove the trim cover (3) from the seat belt turning loop on the inside of the upper B-pillar.
3. Remove the screw (1) that secures the turning loop to the seat belt height adjuster on the upper B-pillar.
4. Lower the seat belt (4) and turning loop from the B-pillar.
