300 V6-3.5L (2008)
4. Disconnect the motor electrical connector.
5. Remove the fasteners holding the motor to the seat adjuster (1).
6. Remove motor from seat adjuster (2).
HEIGHT ADJUST MOTOR
WARNING: Use caution when removing the height adjust motor (3) if the motor is inoperative, and the power seat is not in the full up position.
The seat adjuster assembly (2) is under load from the height adjust spring and may cause the motor to rotate under pressure when the fasteners
are removed. The seat adjuster assembly also may spring upward when the motor is removed. If the height adjust motor is operative, move the
power seat to the full up position prior to disconnecting the battery.
1. Disconnect and isolate the battery negative cable.
2. Remove the affected seat with the inoperative motor (3) See: Service and Repair/Seat - Removal.
