300 V6-3.5L (2008)
Hydraulic Control Assembly - Antilock Brakes: Overhaul
Disassembly
DISASSEMBLY
CAUTION: For Adaptive Cruise Control (ACC) equipped vehicles, the ABM and HCU are not separately serviceable. They must be replaced
as an assembly.
1. Remove two screws attaching the mounting bracket to the HCU. Remove the bracket.
2. Remove four screws (1) attaching ABM (2) to HCU.
3. Separate ABM (1) from HCU (2).
Assembly
ASSEMBLY
1. Clean any debris off the mating surfaces of the HCU and ABM.
CAUTION: When installing new O-rings or solenoid valve stem seals, do not use any type of lubricant.