300 V6-3.5L (2008)
4. Remove shoe actuator lever (1) from end of cable (2) and support.
5. Remove screw (4) fastening cable (2) to knuckle (3). Remove cable from knuckle.
6. Remove cable (2) from routing guide (1).
7. Place 13 mm 12-point box wrench (4) over cable strand and completely onto cable retainer (3) as shown at crossmember bracket (1 - left)(2 -
right). It may be necessary to wiggle wrench around somewhat to collapse retainer fingers. With wrench in place, pull cable from bracket.
8. Remove parking brake cable from vehicle.
