300 V6-3.5L (2008)
10. Remove the front drive shaft heat shield (4).
11. Paint mark and remove the front drive shaft.
12. Remove the right catalytic converter.
13. Separate the power steering hose from cradle hold down and position the hose aside.
14. Remove the lower engine mount to cradle fasteners.
15. Remove the front sway bar.
16. Raise and support the engine with a jack stand.
17. Remove the front axle housing support bracket (1).
18. Remove the front axle housing (3) fasteners, rotate the housing position and remove the axle housing (3).
19. Lower the engine and remove the jack stand.
20. Remove the oil cooler hoses from the oil cooler and remove the oil cooler (if equipped) See: Oil Cooler/Service and Repair/Engine Oil Cooler -
Removal.
