300 V6-3.5L (2008)
4. Install the oil pan gasket (4) to the engine block (5).
5. Install the oil pan (1) while aligning the oil level indicator tube and attach the fasteners finger tight.
NOTE: Assure that the rear face of the oil pan is flush to the transmission bell housing when installing the oil pan.
6. Pre-torque the horizontal rear oil pan to transmission bolts to 1.4 Nm (12 lbs. in.).
7. First tighten the M8 (1) oil pan alignment bolt to 28 Nm (250 lbs. in.), then tighten bolt (2) to 28 Nm (250 lbs. in.).
8. Tighten the remaining M8 bolts and M8 nuts to 28 Nm (250 lbs. in.), and the M6 bolts to 12 Nm (105 lbs. in).
9. Tighten the four M10 oil pan (2) to transmission (3) bolts (1) to 55 Nm (40 lbs.ft.).