300 V6-3.5L (2008)
22. Install the left front drive axle intermediate shaft housing (3) and support bracket. Tighten fasteners to 25 Nm (19 lbs. ft.).
23. Connect the power steering hoses to the steering rack.
24. Install the left front drive axle (2).
25. Install the right front drive axle (2).
26. Lower the vehicle.
27. Fill engine crankcase with the proper oil to the correct level .
28. Fill the cooling system See: Cooling System/Service and Repair.
29. Fill the power steering.
30. Connect the negative battery cable.
