300 V6-3.5L (2008)
Exhaust Manifold: Removal and Replacement
Left
LEFT EXHAUST MANIFOLD
1. Disconnect and isolate the negative battery cable.
2. Raise and support the vehicle.
3. Separate the front exhaust pipe to manifold union (2).
4. Lower the vehicle.
5. Disconnect and remove the oxygen sensor from the exhaust manifold (7)
6. Remove the exhaust manifold shield (5) retaining bolts, exhaust manifold (7) , and discard gasket (1).
Right
RIGHT EXHAUST MANIFOLD
1. Disconnect the negative battery cable.
2. Disconnect the upstream oxygen sensor electrical connector.
3. Raise and support the vehicle.
4. Remove the exhaust manifold to exhaust pipe flange retaining bolts (1).
5. Lower the vehicle.
6. Remove the exhaust manifold heat shield and manifold.