300 V6-3.5L (2008)
HOUSING-AIR INLET
NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
NOTE: LHD model shown. RHD model similar.
1. Remove the air inlet housing (1) from the HVAC housing and place it on a workbench See: Removal and Replacement/HVAC Housing - Removal
2. Remove the three screws (2) that secure the recirculation door actuator (3) to the air inlet housing and remove the actuator.
3. Remove the recirculation-air door (4) from the air inlet housing.
HVAC Housing
HOUSING-HVAC
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the A/C evaporator.
NOTE: LHD model shown in illustrations. RHD model similar.
1. Remove the HVAC housing assembly and place it on a workbench See: Removal and Replacement/HVAC Housing - Removal.
2. Remove the air distribution housing (3) from the HVAC housing (1) See: Removal and Replacement/HVAC Housing - Removal.
3. Remove the air inlet housing (2) from the HVAC housing See: Removal and Replacement/HVAC Housing - Removal.