300 V6-3.5L (2008)
6. Loosen, but do not remove the bolt (1) retaining the handle to the outer tube.
NOTE: Do not remove the bolt all the way.
7. Using a plastic tipped hammer, gently tap the head of the handle retaining bolt and the opposing wedge nut.
8. Remove the handle from the outer tube.
9. Remove the A-pillar trim from the spot lamp outer tube.
CAUTION: Support the head of the spot lamp while loosening the head assembly clamp screw.
10. Loosen the clamp screw (1) at the base of the spot lamp head assembly.
11. Carefully remove the spot lamp head with the intermediate and inner shafts from the outer tube and mounting bracket.
