300 V6-3.5L (2008)
11. 5.7L/6.1L Engines - Install pressure hose (2) to pump (1). Tighten pressure hose tube nut to 47 Nm (35 ft. lbs.).
12. 3.0L Diesel Engine - Install pressure hose (2) to pump (1). Tighten pressure hose tube nut to 47 Nm (35 ft. lbs.).
13. Install air cleaner housing and inlet tube. See: Filters/Air Cleaner Housing/Service and Repair/Air Cleaner Housing - Installation
14. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
15. Fill and bleed power steering system. See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair
Pressure Hose - Right-Hand-Drive
RIGHT-HAND-DRIVE
1. Install pressure hose in engine compartment from underneath.
