300 V6-3.5L (2008)
9. Hold left camshaft sprocket with a 36 mm (1 7/16 in.) box end wrench.
10. Loosen and remove the camshaft gear retaining bolt and washer. The left bolt is 255 mm (10.0 in.) long.
NOTE: The camshaft timing gears are keyed to the camshaft.
11. Remove the camshaft sprocket.
CAUTION: The right camshaft must be pushed rearward approximately 3 1/2 inches to remove the camshaft gear retaining bolt and gear.
Care must be taken not to scratch or nick the camshaft or cylinder head journals when moving camshaft.
12. Hold right camshaft sprocket with a 36 mm (1 7/16 in.) box end wrench.
13. Loosen and remove the camshaft gear retaining bolt and washer. The right bolt is 213 mm (8 3/8 in.) long.
NOTE: The camshaft timing gears are keyed to the camshaft.
14. Remove the camshaft sprocket.
Crankshaft Sprocket
CRANKSHAFT SPROCKET