chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P050D Set|Page 5631 > < Engine Controls - MIL ON/DTC P2181 Is Stored In Memory|Page 5626
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - MIL ON/DTC P050D Set

NUMBER: 18-031-08 REV. A

GROUP: Vehicle Performance

DATE: December 3, 2008

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 18-031-08, DATED JULY 25, 2008, WHICH SHOULD BE REMOVED
FROM YOUR FILES. THIS IS A COMPLETE REVISION AND NO ASTERISKS HAVE BEEN USED TO HIGHLIGHT REVISIONS.

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN ARE AVAILABLE VIA THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 9.03 OR HIGHER.

StarMOBILE DESKTOP CLIENT -OR- StarMOBILE STANDALONE MODE MAY ALSO BE USED TO PERFORM THE FLASH.

SUBJECT:
Flash: MIL Illumination Diagnostic Trouble Code P050D - Cold Start Rough Idle Set

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software and Initializing the NAG1
transmission (sales code DGJ) or Clear the Variable Line Pressure (VLP) Counters on 42RLE equipped vehicles (sales code DGV) with the
StarSCAN(R)/StarMobile(R).

CAUTION:

It is important to initialize the NAG1 transmission (sales code DGJ) for 2008 model year or Clear the Variable Line Pressure (VLP) Counters on
42RLE equipped vehicles (sales code DGV) with the StarSCAN(R)/StarMobile(R).

MODELS:

2008

(LX)

300 / Magnum / Charger

2008

(LE)

300C/300 Touring (International Markets)

NOTE:

This bulletin applies to models equipped with a 2.7L or 3.5L engine (sales code EER or EGG) and emissions package sales code NAE built before
August 23, 2008 (MDH 0823XX).

SYMPTOM/CONDITION:

Some customers may complain of a MIL illumination. Upon further investigation the Technician may find that P050D - Cold Start Rough Idle has been
set.

DIAGNOSIS:

Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's other then the one listed above are present record them on the repair order and repair as necessary before proceeding further with this
bulletin.

If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED:

Engine Controls - MIL ON/DTC P050D Set|Page 5631 > < Engine Controls - MIL ON/DTC P2181 Is Stored In Memory|Page 5626