300 V6-3.5L (2008)
4. Remove the one retaining nut (1) to the center seat belt retractor (2).
REAR CENTER - WAGON
1. Remove the left seat back trim cover (60% portion of the rear folding seats) See: Body and Frame/Seats/Seat Back/Service and Repair/Seat Back
Cushion / Cover - Removal.
2. Disconnect the rear seat back latching cable from seat frame.
NOTE: If the seat back is not fully latched, the center seat belt will not release from the retractor.
3. Remove the one bolt (2) holding the rear center seat belt retractor.