300 V6-3.5L (2008)
1. Position the retractor (4) on the C-pillar to the indexing tab slips up into the pillar.
2. Install the retractor mounting bolt (3). Torque bolt to 32 Nm (24 ft. lbs.).
3. Install the one upper turning loop retaining bolt (2). Torque bolt to 40 Nm (30 ft. lbs.).
4. Install the upper C-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Installation.
