300 V6-3.5L (2008)
CAUTION: Do not twist the inner tie rod-to-steering gear boots during front wheel Toe adjustment. Remove the boot clamps (2) at the inner tie
rods and make sure the boots move freely on the inner tie rods.
12. AWD - Loosen the jam nut (1) at the inner-to-outer tie rod (3-4) connection.
13. RWD - Loosen the jam nut (3) at the inner-to-outer tie rod (4-5) connection.
14. Grasp the inner tie rod at the hex and rotate as necessary to adjust front toe to the preferred toe specification. See: Specifications
15. AWD - Tighten the tie rod jam nut (3) to 75 Nm (55 ft. lbs.) torque using care not to lose adjustment.
