300 V6-3.5L (2008)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
Standard
STANDARD
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Position under-hoist utility jack or jack stand under outer spring link adding just enough support to keep suspension from going into full-rebound
when shock absorber mounting bolts are removed.
4. Remove shock absorber (1) lower mounting bolt (2) and nut (4).
