300 V6-3.5L (2008)
3. Install parking brake shoe adjuster (1) between upper and lower parking brake shoes. Position end of adjuster with star wheel upward. Once in
place, slide upper shoe downward against adjuster mounting slot, taking up any slack between two pieces.
4. Using appropriate tools, install spring (3) at adjuster.
NOTE: When measuring brake drum diameter, diameter should be measured in center of shoe contact surface area.
5. Using Brake Shoe Gauge, Special Tool C-3919, or equivalent, measure inside diameter of parking brake drum portion of rotor.
6. Place Gauge (1) over parking brake shoes at widest point.
7. Using adjuster star wheel (2), adjust parking brake shoes until linings on both park brake shoes just touch jaws on gauge. This will give a good
preliminary adjustment of parking brake shoes, before a final adjustment is made at end of this procedure.
8. Install brake rotor and components removed to access it. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Installation
9. Install wheel and tire assembly See: Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Tighten wheel mounting (lug)
