300 V6-3.5L (2008)
Differential Mount: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate battery negative cable (2) from battery post. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery
Reconnection
2. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
3. On each side of vehicle rear, remove wheel mounting nuts (3), then tire and wheel assembly (1).
4. On each side of vehicle rear, while a helper applies brakes to keep hub from rotating, remove hub nut (1) from half shaft (2).