300 V6-3.5L VIN G (2005)
1. Install the engine mount to the engine bracket and hand tighten. Tighten bolts to 54 Nm (40 lbs. ft.).
2. Install and hand tighten the engine mount through studs.
3. Tighten the engine mount to engine bracket fasteners to 75 Nm (55 lbs. ft.).
4. Install the engine mount heat shield (2). Tighten the fasteners to 11 Nm (97 inch lbs.).
5. Lower the engine and remove the lifting devise.
6. Tighten the engine mount through studs to 12 Nm (106 inch lbs.).
7. Install the right engine mount to cradle nuts and tighten both engine mount fasteners to 75 Nm (55 lbs. ft.).
8. Lower the vehicle.
9. Connect the negative battery cable.
