300 V6-3.5L VIN G (2005)
Fluid - A/T: Service and Repair
Check Oil Level
Special Tools
Dipstick 9336
STANDARD PROCEDURE
CHECK OIL LEVEL
1. Verify that the vehicle is parked on a level surface.
2. Remove the dipstick tube cap.
WARNING: Risk of accident from vehicle starting off by itself when engine running. Risk of injury from contusions and burns if you insert
your hands into the engine when it is started or when it is running. Secure vehicle to prevent it from moving off by itself. Wear properly
fastened and close-fitting work clothes. Do not touch hot or rotating parts.
3. Actuate the service brake. Start engine and let it run at idle speed in selector lever position "P".
4. Shift through the transmission modes several times with the vehicle stationary and the engine idling
