300 V6-3.5L VIN G (2005)
8. Remove screw (5) securing pressure hose (1) routing clamp to front of engine cradle (3).
9. Remove screw (4) fastening routing clamps securing pressure (1) and return (2) hoses to right side of engine cradle (3).
10. Unthread pressure hose tube nut (2) from steering gear (1).
11. Remove pressure hose from vehicle.
INSTALLATION
AWD
1. Install pressure hose in engine compartment from underneath.
NOTE: Always use a NEW O-ring on the end of the pressure or return hose at the gear.
