300 SRT-8 V8-6.1L (2008)
21. Carefully lower the liftgate glass onto the liftgate glass fence.
CAUTION: It is not possible to move the liftgate glass after installation. The liftgate glass should never be pressed into place by more
than one person, because the glass can break if pressed simultaneously on both sides.
22. Push the liftgate glass inward until the glass comes into contact with the spacers located on each side of the liftgate glass fence.
23. Connect the wire connectors to the rear window defogger terminals and, rear window mounted radio antenna, if equipped.
24. Install the liftgate trim panels .
25. Install the rear window wiper arm, if equipped See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arms - Installation.
