300 SRT-8 V8-6.1L (2008)
32. Insert Brace (1), Special Tool 9031-12, between Support 9031-11 (3) and bushing bore flange (2) matching angle cut in Brace to bore flange.
33. Snug set-screws (1) against Brace 9031-12. Do not overtighten set-screws as they will distort and bend bushing bore flange.
NOTE: Prior to using Press (1), Special Tool C-4212F, lubricate screw-drive threads to provide ease of use and promote tool longevity.
34. Assemble tools (See following list) over bushing as shown.
-
(1) Press C-4212F
-
(2) Remover 9031-2
-
(3) Receiver 9031-1
35. Tighten Press (1) screw-drive, pressing bushing out of crossmember.
36. Remove all tools.
Spring Link
