300 SRT-8 V8-6.1L (2008)
Oil Pan: Service and Repair
Engine Oil Pan - Removal
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the intake manifold. See: Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold - Removal.
3. Install engine lift fixture (2)special tool # 8984 and adapter (4) # 8984-UPD. Never use air tools when installing fasteners to engine.
4. Raise vehicle.
5. Remove the belly pan (2). See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair
6. Drain engine oil and remove the oil filter.
7. Unbolt and lower the steering rack from the mounts. Do not remove P/S hoses, tie rod ends or disconnect steering column.