300 SRT-8 V8-6.1L (2008)
6. 3.0L Diesel Engine - Unthread tube nut, then remove pressure hose (2) from pump (1).
7. Raise and support vehicle. See: Vehicle Lifting/Service and Repair
8. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
9. Remove screw (5) securing pressure hose (1) routing clamp to front of engine cradle (3).
10. Remove screw (4) fastening routing clamps securing pressure (1) and return (2) hoses to right side of engine cradle (3).
11. Unthread pressure hose tube nut (2) from steering gear (1).
12. Remove pressure hose from vehicle.
Pressure Hose - Right-Hand-Drive
RIGHT-HAND-DRIVE
