300 SRT-8 V8-6.1L (2008)
1. Place the rear center retractor (2) into position and install the one retaining nut (1). Torque nut to 34 Nm (25 ft. lbs.).
2. Install the rear shelf trim panel See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Installation.
3. Install the one nut (3) to the seat belt lower anchor. Torque nut to 34 Nm (25 ft. lbs.).
4. Install the rear seat cushion See: Body and Frame/Seats/Seat Cushion/Service and Repair/Seat Cushion / Cover - Installation.
REAR CENTER - WAGON
