300 SRT-8 V8-6.1L (2008)
is 12 mm or greater. To do so, loosen 3 mounting bolts slightly, leaving one on opposite side of shift snugged to pivot off of. Shift crossmember
rearward and snug loosened bolts. Remeasure opposite side to be sure it still maintains minimum 12 mm distance.
23. Tighten all four crossmember mounting bolts (2 and 3) to 180 Nm (133 ft. lbs.).
24. Remove jack (3) from under rear axle differential.
25. Remove bungee cord (1) supporting propeller shaft (2).
