300 SRT-8 V8-6.1L (2008)
10. Tighten all crossmember mounting bolts (2 and 3) to 180 Nm (133 ft. lbs.).
11. Remove jack (3) from under rear axle differential.
12. If previously lowered, raise rear exhaust back to mounted position and connect exhaust isolators at muffler and resonators hangers. Remove jack
or stand below exhaust muffler.
13. Install fuel filler tube. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Fuel Filler Neck/Service and Repair/Installation
