300 SRT-8 V8-6.1L (2008)
5. Install tire and wheel assembly (1) See: Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Tighten wheel mounting
nuts (3) to 150 Nm (110 ft. lbs.) torque.
6. Lower vehicle.
7. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
8. Check and adjust brake fluid level in reservoir (1) as necessary.
9. Road test vehicle and make several stops to wear off any foreign material on brakes and to seat brake pads.
